Peter Brown's ShopTime

A Photo Guide: My 1/2 roundnose scraper. This is my only hollowing tool Roughed to cylinder and then added a 1/8 tenon on each end. Used parting tool to separate lid from base. (Finished cut on band saw) Mounted lid in chuck and scraped out lid. Applied Mylands to inside. Used scraper to hollow out base. This took a bit of time... Sanded inside...for what felt like hours! Applied Mylands to inside. Added the top and taped seam and shaped the outside to my liking. Replaced tape with a paper towel wedged inside box lid. Held fine and was easier to sand. Sanded, sanded and sanded. Finished box with beesax and parted off base from chuck. Finished next to my first box attempt. That lid was pitched across the room at 1200 RPM's Oh look! It opens.... Here's my latest one: Shallow Box

It's almost Christmas time! I've got a few more of these to make!!

Egg turning! Another fun challenge at the WoodNet Turners Forum . Mine was made from Juniper. It both looked and smelled great! This has two coats of Mylands friction polish. This was a fun and simple turning that I will be sure to try again soon!

Faith in what is unknown can be difficult. Why do we believe in what we believe in? Is it just a matter of faith? Many times that is all it takes. Faith….and a multimillion dollar advertising budget. Advertising, as you know, is a great catalyst of faith. Glue. Ordinary, regular, everyday glue. This is a post about glue. Now that we are clear on that I feel I can continue. I say that ‘faith’ is attaching a series of wooden boards together, with nothing more than yellow glue and expecting it to hold for a generation. Faith in action is selling said item for over a hundred bucks. Take for example your average wooden kitchen cutting board. Did you know that your fancy wooden kitchen cutting board is nothing more than wood and glue. That’s it. Wood. Glue, and maybe some laxative for a finish. I’m not kidding you! This is the real scoop here! The most popular hundred-plus-dollar-wooden-cutting-board-finish is mineral oil. So wood, glue and a bottle of unstopper....

Faith in what is unknown can be difficult. Why do we believe in what we believe in? Is it just a matter of faith? Many times that is all it takes. Faith....and a multimillion dollar advertising budget. Advertising, as you know, is a great catalyst of faith. Glue. Ordinary, regular, everyday glue. This is a post about glue. Now that we are clear on that I feel I can continue. I say that 'faith' is attaching a series of wooden boards together, with nothing more than yellow glue and expecting it to hold for a generation. Faith in action is selling said item for over a hundred bucks. Take for example your average wooden kitchen cutting board. Did you know that your fancy wooden kitchen cutting board is nothing more than wood and glue. That's it. Wood. Glue, and maybe some laxative for a finish. I'm not kidding you! This is the real scoop here! The most popular hundred-plus-dollar-wooden-cutting-board-finish is mineral oil. So wood, glue and a bottle of unstopper. Now you...

It's Christmas in July... Another fun challenge at the WoodNet Turners Forum . Mine was mediocre in comparison, but I learned some new techniques and enjoyed it. Plus once I'm done with my cabinet build, I'll probably make some more of these. Nothing improves results as well as practice!

I'm now the owner of a used Delta 4 inch jointer. Beyond that I know little about it. I just picked it up on Sunday and haven't had too much time to check it out. The previous owner said it was her husbands, and that the last time he used it, he lost half his thumb! As soon as I heard that I knew that this was the tool for me! Weighing in at a back aching weight of who the heck knows, I wrestled it and attached stand and motor out of my pickup bed. After 3 hours of WD-40 and a kitchen pad, I found a shiny cast iron bed and fence. I jointed a piece of pine and marveled at the smooth line it created without even dialing it in. I believe that for my small shop this little beauty is going to fit right in. Now the real work begins, and for $35, I think I did quite well.