Skip to main content

Sacraficing to Oops

There seems to be no shortages of people places or objects to bestow your esteem, regard, respect, approval or reverence. So how is it that I ended up here? Recently I find myself making sacrifices to a god that I didn't even know existed until a few moths back. This god is now the ruling force in my workshop, second to none with the power to change the outcome of even the smallest of event. That's right, the god of Oops.

Somehow I have unknowingly allowed myself to be ensnared in the firm grip of this relativity low profile god. What many folks would dismiss as coincidence, I see as evidence to the ethereal hand of Oops. Oops is a very demanding god

Oops demands regular sacrifices of nearly all of my projects. Sometimes, he only wants a small thing, like a striped screw head, or stray paint drip on an otherwise clean job. Other times my reverence is tested with something of a slightly larger scale. As I noted in an earlier post, Oops was apparently drowning in wistful melancholy, just as I had almost completed a project. As such his demands were much more stringent. I had the largest Oops offering to date, as I dismantled every last joint of a project to lift his spirits and cement my everlasting commitment to this terribly vengeful god.

So goes my current religious experience. I decided after that last project, that I would limiting my devotion and be giving less to this rather impish deity. I had a job that was to be a set of lattice framed doors to cover the top of my mothers koi pond. The hope was to offer some relief to an issue she has been experiencing with some rather pesky fishermen. The raccoons had discovered a nice source of fresh fish and I was charged with fixing it so they couldn't readily get at their after midnight snack.

As I put the last finishing touches on the doors I realized I hadn't made any amends to Oops. In fact I was quite proud of the fact, and mentioned it in passing to my wife as she looked over my handy work. I walked back into the shop about an hour later to sweep up sawdust and move the items, when I noticed a chip of wood missing from a joint.

Apparently Oops got wind of my statement and wasn't interested in loosing another follower. I searched all over the shop for the sliver of wood that was missing. It had apparently vanished, as if snatched up by Oops in a display of power. A sort of forced sacrifice to affirm who in fact was in charge of my so called free will.

I spent an hour or so repairing the corner. It seems I'm still an unwilling servant. Hopefully in the future I can find a way to rid myself of this god. Until then, I will continue in my sacrifices and increase my supply of wood glue and sandpaper.

Comments

Popular posts from this blog

Book Tablet Holder

Tablet stand made from a 400 page book and some epoxy resin. Paper micarta is the proper term for it, but it doesn't really capture the essence of the idea. Those 400 pages hold but a single story, and now they can upright a device capable of holding thousands of stories. And with only a book and 30 some odd ounces of epoxy, you can make your own! Just don't use a book that is one of your favorites. Which  honestly is why I picked this one, and the fact that the name was well suited! Really it's the ultimate upcycling!

Rikon Mini Lathe

I got busy this weekend and completed a couple of projects. I took a number of pictures of my new lathe in action. Most of them during the turning of a recent euro stlye pen made from padauk and ebony with a CA finish. It was a SF Giants theme, and the lathe was covered with padauk streamers and ebony dust. Very cool first project. I had a little trouble with the finish owning to the extreme cold in the garage, but overall a pretty good result. As I normally do, I forgot something. I forgot to bring in the camera and upload the pictures to photobucket so I could post them. As such, there is once again no proof. sigh... Everything is simpler. No more wrench to move the tool rest or tail stock. No more indexing pin to take off the faceplate. No more hassle removing the centers or mandrels. Man what a difference! In addition I tried turning a few things between centers. Basically just mangled some spindle blanks. Good fun, lots of walnut shavings. So, the new lathe has officially been br...

Turning A Sphere

Turning a ball is more work than you think. I first tried a simple method.. Turn a blank round Form the ball Part off and sand. Clearly, not a ball... On to step two! Chuck up a chunk of walnut, and scrape out a cup... Part off for the tailstock.... Scrape out an matched set for the chuck side.. They should match up. Insert square block.. Okay. You turn off the edges, rotate your block. Turn off more edges, rotate your block. Etc. About 15-20 minutes later... You can see how I turned a way the jam chuck as I went. The closer you get to spherical, the less you remove each rotation. Like anything practice till you're happy with it!